System Controls in TireMaster Corporate
This help topic is applicable to the following TireMaster application:
Some system control settings in TireMaster Corporate are effective at all sites, while others need to be completed for each store. The controls that affect all sites are referred to as corporate controls, and the settings that can differ on a site‑by‑site basis are called store controls. You can move back and forth between the corporate and store controls by selecting the radio buttons in the lower-left corner of the System Controls screen
Note: Because store controls can be set on a site-by-site basis, each control is listed for each site. Therefore, if you have four sites, each control is listed four times.
Set the Same Control for Multiple Sites
For some store controls, you might need to assign the same setting (such as the statement APR or default tax level) to all sites. In this scenario, you can set the control for one site and easily apply the changes to all of the other sites.
To set a group of store controls
|
1.
|
Select Setup > System Controls. The System Controls screen opens. |
|
2.
|
Click the tab that includes the control you want to set. |
|
3.
|
Select Store Controls. |
|
4.
|
Select the Apply Changes to All Stores check box. |
|
5.
|
Select the control you want to set for one of the sites listed, and press Enter. |
|
6.
|
Set the control as needed, and click OK. The control is updated with the same settings for all sites. |
|
7.
|
Close the System Controls screen. |
